Daystar KJ03007BK User Manual download pdf

KJ03007 Jeep TJ Rear Control Arm Bushing Kit 1997-2001

Installation Instructions

1. Please read the instructions completely and check the Bill of Material before beginning the installation.

2. Raise and support the vehicle with jack stands in front of the rear leaf spring perches so that the tires

just touch the ground.

3. Remove one control arm at a time noting its position and how it is installed. On the upper control arms

you will have to remove the E-brake cables.

4. Remove the factory rubber bushings by burning out the centers with a suitable propane or acetylene

torch. DO NOT damage the outer shells, as they will be reused.

5. Clean the outer shells with a suitable tool so that they are free and clear of any debris.

6. Using the supplied Daystar Lubrethane, install the corresponding bushing, thrust washer, and steel

sleeve into the control arm sleeve per the figures below.

7. Reinstall the control arm from the position in which it was removed and torque to factory specifications.

8. Complete this for the other three control arms.

9. Recheck all bolts and re-torque after 500 miles.

www.DaystarWeb.com

Tech Support Contact Info

[email protected]

Phone: 623.907.0081

Fax: 623.907.

0088

841 South 71

Avenue

Phoenix, AZ 85043

Instruction Sheet P10521

 2000 Daystar Products International

Inc.

Bill Of Materials

Part No.

Description Qty.

M02413

Bushing 4

M02409

Thrust Washer 4

M02414

Bushing 4

M02411

Thrust Washer 4

S10091 Steel Sleeve 4

S10092 Steel Sleeve 4

A01133 Daystar Lubrethane 1

Installation Instructions 1

Summary of Contents

Page 1 - Installation Instructions

KJ03007 Jeep TJ Rear Control Arm Bushing Kit 1997-2001 Installation Instructions

Comments to this Manuals

No comments

Daystar KJ03007BK User Manual

Browse online or download User Manual for For the car Daystar KJ03007BK. Daystar KJ03007BK User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Daystar KJ03007BK