TOOLS NEEDED • 5/8 wrench • 16 mm socket • 18 mm socket • Extension • Phillips screw driver • Torque wrench • Floor jack x 1 • 2 x 4 block
Thank you for choosing Daystar Products Daystar recommends a certified technician install this system . In addi-tion to these instruct
12. With all the body mount spacers installed remove the floor jack. use a 16mm socket and tighten all the 2 nuts per mount down to 40 ft lbs. Usi
4. With a 16mm socket loosen the two nuts at each of the body mounts, with a 18mm socket loosen the one bolt at each of the body mount. DO NOT
Comments to this Manuals