Daystar KC09100BK User Manual download pdf (Page 2)

Tools Needed

Quantity Description

1 Floor Jack

2 Jack Stands

2 Wheel Chocks

1 Lug Wrench

1 1/2” Drive Ratchet

1 1/2” Drive Socket Set

1 Wrench Set

1 Coil Spring Compressor

1 Ball Joint / Tie Rod Separator

Parts List

Quantity Part Number Description

KIT NUMBER

1 M03210BK spacer Kit KC09100BK DODGE

1 M20224BK spacer Kit KC09103BK DODGE

1 P21249-01

Instructions

1 P10474

Driver Warning Decal

Installation Instructions

!Warning: Always work with appropriate personal safety

gear including safety glasses, gloves and hearing protection if

using air powered tools.

Begin by inspecting the components & hardware for dam-

age. Then compare components & hardware to the bill of materi-

als for completeness. If anything is missing/damaged, do not pro-

ceed with the installation. Please, call Daystar Products (800-595-

7659) and we will send you the missing of damaged components

free of charge.

!Caution: Vehicle front end must be raised to install leveling

kit. Using a hydraulic chassis lift will greatly ease installation.

If another jack is used, assure vehicle is level on a firm sur-

face, in park (1st gear), rear wheels blocked and jack stands

IMPORTANT NOTE: The advertised amount of lift that this kit

provides and the thickness of the spacers supplied will not be the

same! For example, a 2-1/2” lift may only have 1-1/2” thick spac-

ers. The reason for the difference between the spacer thickness

and the amount of lift has to do with suspension geometry. There

is a ratio involved, and it is this ratio that determines the thickness

of the spacers. Rest assured, installing the spacer supplied will

1. Check to see that the spacer kit you purchased matches the year

and model of your vehicle. Spacer kits two inches or taller may

require a spring compressor to install. Ball joint and tie rod

forks may also be useful.

2. A good portion of your front suspension will be disassembled

so this would be a good time to replace any worn parts (i.e. tie

rod ends, ball joints, idler arm and any bushings) Replace bush-

ings with polyurethane replacement parts.

1 2 3 4 5 6

Comments to this Manuals

No comments

Daystar KC09100BK User Manual Page 2

Comments to this Manuals

Related products and manuals for For the car Daystar KC09100BK